|
™ |
|
function and emotion |
|
Copyright © 2003-2008 SYSTEMS AND MAGIC |
|
BlackWire, BlackWire plus+ |
|
The BlackWire has a standard length of 1.5 m* |
|
The BlackWire is a mains cable with semi-balanced geometry, shielded, twisted, with an area of 2.5mmq for each conductor. Despite the 11mm external diameter, it keeps excellent flexibility in all conditions.
BlackWire use is advised in conjunction with filters and power distributors of the BlackNoise line, particularly on the output of the devices themselves.
Shielding, for example, avoids that the |
|
cable acts as an antenna, either receiving or radiating electromagnetic energy and allows the cleanliness performed by the BlackNoise filters to reach unimpaired the electronic inlets.
About this topic see also questions 8 and 9 in the FAQ.
But that’s not the only reason: the Schuko plug guarantees the best possible mechanical and electrical coupling (See also question 7 in the FAQ), and the |
|
e-mail: info@systemsandmagic.com |
|
Via Raffaele Piria 17 00156 Roma (RM) - Italy Voice +39-06-40500329 / +39-338-8928518 - Fax +39-06-62276249 Skype: systemsandmagic_lab |
|
M A D E I N I T A L Y |
|
S Y S T E M S A N D M A G I C |
|
The BlackWire plus+ diverts from the standard BlackWire for it adopts an excellent Wattgate as the current IEC plug, the same used for the much more costly GoldWire.
All the options available for the standard BlackWire (lengths and different terminations), are still offered for the BlackWire plus+ without price variations. |
|
*The BlackWire is normally available in 1.5 meters standard length, IEC and Schuko terminated as shown in the photos.
Longer cables are available on request, with an additional €25 for each meter or fraction. For cables shorter than the standard there is a fixed €25 euro addition.
In place of the Schuko plug is available either the Italian style 16A plug, or the US plug at the additional price of €20 and €40 respectively.
Finally, in place of the straight IEC inlet is available the right angle one at the additional price of 20€.
** Of the three available plugs, mains side, only the Schuko can (and is!) soldered to the cable. |
|
internal connections, either plug and inlet side, are soldered** assuring the maximum possible contact area and in the same time the performance consistency over time.
Cabling, finally, follows the IEC standard for neutral and phase, the latter marked on the mains plug too.
At a particularly affordable price, the BlackWire represents an excellent alternative to more expensive cables without any limitation in terms of power constraint or interference protection.
To gain even more performance, see BlackWire plus+, GoldWire. |
|
Standard BlackWire IEC plug |
|
Read the BlackWire/GoldWire brochure in PDF format |
|
English German |
