Copyright © 2003-2018

SYSTEMS AND MAGIC

M A D E  I N  I T A L Y

S Y S T E M S   A N D   M A G I C

PHASEASY

The Phaseasy enables to find the “right phase” of the whole audio-video setup throught the measurement of the current dispersion toward earth.

 

This is the last of a series of three accessories all dedicated to solve the practical matters about the correct finding and tune-up of the AC phase. See also Phaser e Phable.

 

This instrument measures the dispersion current (the real energy, rather than the potential one represented by the voltage) that flows both between the different electronics (by the earth connection of signal wires), and between the earth of each instrument and the safety ground of the electrical system.

Read the Phaseasy

brochure in PDF format

The dispersion current, however small its value, it’s always present and has common path with some circuit sections concerned with sensible electric signals.

 

This current ovelaps with the audio and video signals (either analog or digital), adds noise and creates, consequently, distortion.

 

This distortion becomes evident mainly as a loss of focus, detail and depth (audio), or contrast, saturation and sharpness (video). In the worst cases the dispersion current might be cause of an annoying underground buzz or, in the extreme, if it grows of dangerous degree, be able to bring into action the household electric system protections.

 

The Phaseasy allows, through two different measurements methods (taking the current dispersion between the electronics themselves or between them and the safety ground) to find the “best phase” in any setup, either audio or video.

 

The amount of the current dispersion at play is shown through a column of twelve LEDs that lights up in a manner very much alike to a Vu-meter, giving a very clear and immediate reading.

The Phaseasy kit includes a full set of accessories that enable measurements to be taken on each and every possible audio-video gear, either with or without detachable mains cable, ground connection, and either vintage or brand new.

Current dispersion is

clearly indicated by a LED scale

The Phaseasy (CE certified) is a measuring instrument in SMD technology managed by a microprocessor with a sensitivity comparable only to high precision professional instruments. It is, in fact, able to distinguish up to +-1 microamperes (the million part of ampere) of current, that is to say a sensitivity that is an order of magnitude higher than the one measured by any tester and by many other instruments, even of a much higher price.

 

The Phable requires for its working a long-life lithium battery (replaceable), already installed.

Ask us the latest version

(1.4) of the Phaseasy

manual in PDF format

function and emotion

BlackNoise Mains Filters

 

V2

Extreme

500

1000

2500

MiniBlack

e-Spira

Zero

 

Comparison Table

 

Ætere’s

Instruments

 

Energy Distributors

 

DUPLEX

Four, Six, Eight

SixColor

Derive!

slim3, slim5

 

Mains Cables

 

joker

BlackWire plus+

GoldWire

PEARL

 

Accessories

 

Phaser

Phable

Phaseasy

Adapters

90° Plugs

 

Publications

 

Get Better Sound